Package of 3 Galvanized Steel Wire Slides, 3 Galvanized wire fish stops, 3 field points and 6 replacement vanes.
With this kit you can turn you old bolts into fishing bolts. Just take off the existing vanes, put the slide on the shaft and re-fletch the bolt with the replacement vanes. Put the wire fish stop over a field tip, screw the field tip into the bolt and it's done.
The vanes act as a slide stop. The slide will tear the vanes as you use it. They will need to be replaced every 20ish shots.
Fits bolts up to 6.5mm. Inside diameter of slide is around 6.75mm or 17/64th of an inch.
